Installer Forum

Please log in or register to post a question.
The CivicSolar Installer Forum is actively monitored
and all questions are answered within 24 hours.

Default image
I have 12- 270 watt panels that are about 75ft from charge controller [outback 80] What size of eather in line fuss or breaker should I have before the controller. I was also thinking of having at...
Support Question
11/23/2014
Default image
ok. for 8x 80Watt Panels I probably need a 40A Controller, but it is not available here. so I must connect 1x30A an 1x10A controller to my 600Ah batterie bank. How to connect the controllers parallel...
Support Question
11/21/2014
Default image
Inverter uses battery power and excess goes to grid, at night inverter uses battery power and if batteries get low then switches to grid power and also charges batteries.
Support Question
11/20/2014
Default image
In stead of running a power line from home with connections, burried sections, etc., would like to power the water fountain with a local solar unit. The pump will be model Little Giant 501003, with...
Support Question
11/18/2014
Default image
The install manual states it is included.
Support Question
11/15/2014
Default image
To minimize voltage drop I need 3 AWG wire. SMA inverter only allows up to 6 AWG connections. How do I make connections?
Support Question
11/14/2014
Default image
I wish to purchase an initial order of only 2 pallets of HSL 72 poly 290 - 295 watt solar panels for use in Australia. Will your company provide less than the stated 100 panels? If so when can they...
Support Question
11/14/2014
Default image
I would first isolate the house from the Grid. Then I'd fire up the 4kw generator and plug it into the 220 volt receptacle for the whole house. The Fronius Inverter would sense the sign wave...
Support Question
11/12/2014
Default image
The system taps on the line/supply side of the 200 A main breaker of the 120/240 V service. If this was a connection on the load side of the main breaker, the conductors would be 3 AWG and rated at...
Support Question
11/11/2014
Default image
I'm installing 68 modules as 4 strings of 17 with Enphase M215s. My 200 amp service panel does not have any more spaces. Do I need to upgrade my service panel or is there another way to add to the...
Support Question
11/10/2014
Default image
i'm trying to make a small pv kit. I'm blocked on circuit breakers and fuses. Where to use, what to use. And also about sizing.. could any one help. thanks
Support Question
11/6/2014
Default image
The shopping complex has load of 2.5kW for 4 hrs only. The design system should be such 4.0kW solar panels of their roof delivers generated power to grid supply in day time. The power consumption for...
Support Question
11/5/2014
Default image
I like to know where Canadian Solar Panels are manufactured. I was offered Chinese Panel and denied them because I would like my stuff be manufactured either in the USA, Canada or Germany. Can you...
Support Question
11/5/2014
Default image
I am a long time user of Schneider products and I need to build an AC coupled system for battery back up with 400Ah of 48V Gel batteries. Schneider used to sell a 3kW string inverter, but it was...
Support Question
10/27/2014
Default image
I noticed that some of the panels on your site have connectors labeled MC4 and others are labeled Tyco. What does this mean?
Support Question
10/27/2014

Pages