Installer Support

  • solar panel beautiful installation
As the number of U.S. solar installations has proliferated in the past decade, solar contractors are under increasing pressure to complete more installations in less time. This is a good problem for...
Support Article
6/30/2017
  • aluminum, copper, wiring, installation, comparison
Considering aluminum wiring for your PV installation?  It is widely known that the cost of copper is much greater than that of aluminum.  It may seem like an easy choice given that fact alone.  Let...
Support Article
10/5/2015
  • IronRidge Design Configurator Training
  The IronRidge configurator automatically assumes that all rails in a given project run E/W. Indeed, this is the most typical rail orientation as it generally requires the fewest materials and...
Support Article
1/15/2015
  • Grounding Clear Mid Clamp
It’s late in the day and you’re close to finishing up installing the rooftop array.  You only have four more modules left and then you’re done.  However, the sun is quickly sinking and you’re...
Support Article
12/30/2014
Default image
Hello, I have an installation with two series strings. I'd like to have a disconnect box that would handle both these strings without combining them into parallel (the strings will be combined...
Support Question
11/14/2011
Default image
I'm installing a Sunny Boy 6000 on a job, but have limited area to mount the inverter.  What is the required clearance?
Support Question
6/24/2011