What factors affect the performance of a solar module?

The solar modules for my current installation are not performing at the output that I was expecting when I designed the system.   What are the key variables that could be causing this problem?  


The major that affect the output of a module are load resistance, sunlight intensity (module direction and tilt) , cell temperature, shading, soiling,  module mismatch, inverter conversion losses and solar cell structure.    Any of these factors could have a major impact on the output of your module and or your solar array.

This document gives a good overview of each of these factors.

NV Energy Solar Module Performance Summary

Image removed.

Even partial shading of a module will have a dramatic effect on the output.   For example if you shade 25% of one cell on a module, you will reduce the output of the module by 25%.   If you shade 100% of one cell you will loose 75% of the power out put of the entire module.   Shading will have a disproportionate effect on solar power output.

Another major issue is shading.  PV modules are very sensitive to shading. Unlike a solar thermal panel which can tolerate some shading, many brands of PV modules cannot even be shaded by the branch of a leafless tree.

Shading obstructions can be defined as soft or hard sources. If a tree branch, roof vent, chimney or other item is shading from a distance, the shadow is diffuse or dispersed. These soft sources significantly reduce the amount of light reaching the cell(s) of a module. Hard sources are defined as those that stop light from reaching the cell(s), such as a blanket, tree branch, bird dropping, or the like, sitting directly on top of the glass. If even one full cell is hard shaded the voltage of that module will drop to half of its unshaded value in order to protect itself. If enough cells are hard shaded, the module will not convert any energy and will, in fact, become a tiny drain of energy on the entire system.

Partial-shading even one cell of a 36-cell module, will reduce its power output. Because all cells are connected in a series string, the weakest cell will bring the Image removed. others down to its reduced power level. Therefore, whether ½ of one cell is shaded, or ½ a row of cells is shaded as shown above, the power decrease will be the same and proportional to the percentage of area shaded, in this case 50%.

When a full cell is shaded, it can act as a consumer of energy produced by the remainder of the cells, and trigger the module to protect itself .The module will route the power around that series string. If even one full cell in a Image removed. series string is shaded, as seen on the right, it will likely cause the module to reduce its power level to ½ of its full available value. If a row of cells at the bottom of a module is fully shaded the power output may drop to zero. The best way to avoid a drop in output power is to avoid shading whenever possible.


(This information about shading was provided by Kyocera )

9 years 11 months ago
Asked by
Jon Steel
Support topics
Solar panel