S-5! S-5-N mini 1.5 for 1.5" Nail Strip Profiles
S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with patented S-5!® zero-penetration technology for application on the popular 1.5" nail strip metal roof profiles and roofing types with similar profiles. (Please note these clamps were not designed to fit all nail strip profiles.) The clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 to engage the triangle type profiles during the installation process—there is no longer a need to hold the clamp in place while setscrews are tensioned. The combination of these two features allows the clamp to sit straighter on the seam. Go to www.S-5.com/tools for information and tools available for properly attaching and tensioning S-5! clamps. Nail strip profiles just got a whole lot simpler!
The S-5-N 1.5 clamp has been tested for load-to-failure results on most major brands of 1.5" nail strip profiles of standing seam roofing. The independent lab test reports can be used for load-critical designs and applications. S-5! holding strength is unmatched in the industry.
The S-5-N 1.5 and S-5-N 1.5 Mini clamps are each furnished with the hardware shown above. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-N 1.5 is compatible with most common metal roofing materials excluding copper. All included hardware is 300 series stainless steel.
The S-5-N 1.5 Mini is a bit shorter than the S-5-N 1.5 and has one setscrew rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*
*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.
The clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 Mini to engage the triangle-type profiles during the installation process—there is no longer a need to hold the clamp in place while the setscrew is tensioned. The combination of these two features allows the clamp to sit straighter on the seam.